IoT Sharing: http live stream


Showing posts with label http live stream. Show all posts
Showing posts with label http live stream. Show all posts

Sunday, March 29, 2020

Demo 49: ESP32 HTTP Web server for camera live stream and bring it to the world

4:47 AM 0
1. Introduction
In this demo, I will show you how to make a HTTP camera live stream application with ESP32 Cam and OV2640 camera. And publish it to the world so we can view it anywhere.
2. Hardware
I used the camera module:
Figure: ESP32 CAM with OV2640 cam
Board: ESP32 Wrover Module
Upload Speed: 115200
3. Software
3.1 Arduino code
In order to do live stream using HTTP we will use the below HTTP format:

HTTP/1.1 200 OK
Content-Type: multipart/x-mixed-replace; boundary=frame

Content-Type: image/jpeg

[image 1 encoded jpeg data]

Content-Type: image/jpeg

[image 1 encoded jpeg data]

We have to re-use the Demo 12 to send this HTTP format. We have to process HTTP header and response manually.
The software flow of this demo:
- When web browser connect to web server, we send the index html.
- After loading the index html, web browser continue requesting /video
- When facing /video request the server will send the camera frame continuously.
The index html:
<meta charset="utf-8"/>
#content {
  display: flex;
  flex-direction: column;
  justify-content: center;
  align-items: center;
  text-align: center;
  min-height: 100vh;
<body bgcolor="#000000">
  <div id="content">
    <h2 style="color:#ffffff">HTTP ESP32 Cam live stream </h2>
    <img src="video">
The full code:
#include "esp_camera.h"
#include <WiFi.h>

#define PWDN_GPIO_NUM     32
#define RESET_GPIO_NUM    -1
#define XCLK_GPIO_NUM      0
#define SIOD_GPIO_NUM     26
#define SIOC_GPIO_NUM     27

#define Y9_GPIO_NUM       35
#define Y8_GPIO_NUM       34
#define Y7_GPIO_NUM       39
#define Y6_GPIO_NUM       36
#define Y5_GPIO_NUM       21
#define Y4_GPIO_NUM       19
#define Y3_GPIO_NUM       18
#define Y2_GPIO_NUM        5
#define VSYNC_GPIO_NUM    25
#define HREF_GPIO_NUM     23
#define PCLK_GPIO_NUM     22

WiFiServer server(80);
bool connected = false;
WiFiClient live_client;

String index_html = "<meta charset=\"utf-8\"/>\n" \
                    "<style>\n" \
                    "#content {\n" \
                    "display: flex;\n" \
                    "flex-direction: column;\n" \
                    "justify-content: center;\n" \
                    "align-items: center;\n" \
                    "text-align: center;\n" \
                    "min-height: 100vh;}\n" \
                    "</style>\n" \
                    "<body bgcolor=\"#000000\"><div id=\"content\"><h2 style=\"color:#ffffff\">HTTP ESP32 Cam live stream </h2><img src=\"video\"></div></body>";

void configCamera(){
  camera_config_t config;
  config.ledc_channel = LEDC_CHANNEL_0;
  config.ledc_timer = LEDC_TIMER_0;
  config.pin_d0 = Y2_GPIO_NUM;
  config.pin_d1 = Y3_GPIO_NUM;
  config.pin_d2 = Y4_GPIO_NUM;
  config.pin_d3 = Y5_GPIO_NUM;
  config.pin_d4 = Y6_GPIO_NUM;
  config.pin_d5 = Y7_GPIO_NUM;
  config.pin_d6 = Y8_GPIO_NUM;
  config.pin_d7 = Y9_GPIO_NUM;
  config.pin_xclk = XCLK_GPIO_NUM;
  config.pin_pclk = PCLK_GPIO_NUM;
  config.pin_vsync = VSYNC_GPIO_NUM;
  config.pin_href = HREF_GPIO_NUM;
  config.pin_sscb_sda = SIOD_GPIO_NUM;
  config.pin_sscb_scl = SIOC_GPIO_NUM;
  config.pin_pwdn = PWDN_GPIO_NUM;
  config.pin_reset = RESET_GPIO_NUM;
  config.xclk_freq_hz = 20000000;
  config.pixel_format = PIXFORMAT_JPEG;

  config.frame_size = FRAMESIZE_QVGA;
  config.jpeg_quality = 9;
  config.fb_count = 1;

  esp_err_t err = esp_camera_init(&config);
  if (err != ESP_OK) {
    Serial.printf("Camera init failed with error 0x%x", err);

//continue sending camera frame
void liveCam(WiFiClient &client){
  //capture a frame
  camera_fb_t * fb = esp_camera_fb_get();
  if (!fb) {
      Serial.println("Frame buffer could not be acquired");
  client.print("Content-Type: image/jpeg\n\n");
  client.write(fb->buf, fb->len);
  //return the frame buffer back to be reused

void setup() {
  WiFi.begin("I3.41", "0908073858");
  while (WiFi.status() != WL_CONNECTED) {
  String IP = WiFi.localIP().toString();
  Serial.println("IP address: " + IP);
  index_html.replace("server_ip", IP);
void http_resp(){
  WiFiClient client = server.available();                    
    /* check client is connected */           
  if (client.connected()) {     
      /* client send request? */     
      /* request end with '\r' -> this is HTTP protocol format */
      String req = "";
        req += (char);
      Serial.println("request " + req);
      /* First line of HTTP request is "GET / HTTP/1.1"  
        here "GET /" is a request to get the first page at root "/"
        "HTTP/1.1" is HTTP version 1.1
      /* now we parse the request to see which page the client want */
      int addr_start = req.indexOf("GET") + strlen("GET");
      int addr_end = req.indexOf("HTTP", addr_start);
      if (addr_start == -1 || addr_end == -1) {
          Serial.println("Invalid request " + req);
      req = req.substring(addr_start, addr_end);
      Serial.println("Request: " + req);
      String s;
      /* if request is "/" then client request the first page at root "/" -> we process this by return "Hello world"*/
      if (req == "/")
          s = "HTTP/1.1 200 OK\n";
          s += "Content-Type: text/html\n\n";
          s += index_html;
          s += "\n";
      else if (req == "/video")
          live_client = client;
          live_client.print("HTTP/1.1 200 OK\n");
          live_client.print("Content-Type: multipart/x-mixed-replace; boundary=frame\n\n");
          connected = true;
          /* if we can not find the page that client request then we return 404 File not found */
          s = "HTTP/1.1 404 Not Found\n\n";

void loop() {
  if(connected == true){
3.2 Bring it to the world
In order to bring it to the world, we have to use ngrok
Steps to setup ngrok:
- Signup an account
- Copy your Authtoken here
- Download ngrok application here (I am using ubuntu, download it according to your OS)
- Unzip downloaded file, you will see ngrok application
- Open Terminal in the folder that contains ngrok app and run command:
"./ngrok authtoken your_copied_authtoken"
- Bring your esp32 web server to the world using command
"./ngrok http ip_of_esp32_webserver:80"
Figure: ngrok output
From the ngrok output, your public domain from ngrok will be:
Open web browser and type the domain
4. Result
The display is not really smooth.

Read More
Thường mất vài phút để quảng cáo xuất hiện trên trang nhưng thỉnh thoảng, việc này có thể mất đến 1 giờ. Hãy xem hướng dẫn triển khai mã của chúng tôi để biết thêm chi tiết. Ðã xong