Here is 4 Steps to install Mosquitto on Windows.
1. Download and install Mosquitto for Windows here
2. Download and install OpenSSL for Windows here
3. Download and unzip Pthread dll for Windows here. After unzipping Pthread, go to folder Pre-built.2\dll\x86\ and copy all dll files to folder where Mosquitto is installed C:\Program Files (x86)\mosquitto
4. Test mosquitto
- Add mosquitto installation path to Environment Variables.
- mosquitto.exe
- mosquitto_sub -v -h localhost -p 1883 -t "#"
- mosquitto_pub -t 'room1/temp' -m 30
Note: mosquitto_sub is subscribe, mosquitto_pub is publish
1. Download and install Mosquitto for Windows here
2. Download and install OpenSSL for Windows here
3. Download and unzip Pthread dll for Windows here. After unzipping Pthread, go to folder Pre-built.2\dll\x86\ and copy all dll files to folder where Mosquitto is installed C:\Program Files (x86)\mosquitto
4. Test mosquitto
- Add mosquitto installation path to Environment Variables.
Figure: Add mosquitto installation path to Environment Variables
- Open 3 terminals and in each window run commands: - mosquitto.exe
- mosquitto_sub -v -h localhost -p 1883 -t "#"
- mosquitto_pub -t 'room1/temp' -m 30
Note: mosquitto_sub is subscribe, mosquitto_pub is publish
Figure: Mosquitto pub sub test
1 Comments
http://www.abrandao.com/2018/03/running-mosquitto-mqtt-on-windows-10-super-easy/